Moving my scripts over to Github

A mini news flash here, I’ve created a Github account that will be hosting all my scripts.

The first to be moved over is my automated PPTP setup script, now called ezpptp.

The LNMP (Nginx, PHP, MySQL) script has been depreciated in favor of Xeoncross’s lowendscript that I’ve contributed some patches to.

My OpenVPN setup script will soon be joining the other bunch in the near future.

Hopefully with the scripts now being hosted on Github, I’ll see some patches and commits to make them even better 😀

OpenVPN Debian/Ubuntu Setup Script for OpenVZ

An new awesomer script is now available! Check it out!

I have edited a script (credits below as well as a CentOS/RHEL version) for automated OpenVPN setup. OpenVPN server on your OpenVZ VPS can be set up in under a couple of minutes. Port forwarding, client config, key archiving, and config setup is all done for you. Note that setting the port to 53 can be used to bypass captive portals as an alternative to using iodine. Feedback is appreciated.

Make sure that your VPS has it’s TUN/TAP modules enabled by your provider first. To verify it is working, enter the command below:

cat /dev/net/tun

If you receive this message, your TUN/TAP device is ready for use:

cat: /dev/net/tun: File descriptor in bad state

If you receive this message, contact your provider for assistance:

cat: /dev/net/tun: No such file or directory

To install the script, copy and paste this into your SSH client of choice:

chmod +x

Continue reading

Rebuild Icon Cache Guide

1. Close any My Computer windows. This command will kill explorer.

2. Open the Start Menu, and type cmd in the search box and press enter (make sure you run as Administrator if you have UAC on).

3. In the command prompt, Copy and Paste the commands below:

For Windows Vista/2008/7/2008R2:

TASKKILL /IM explorer.exe /F
DEL /A:H IconCache.db

For Windows NT/2000/XP/2003/2003R2:

TASKKILL /IM explorer.exe /F
CD /d %USERPROFILE%\Local Settings\Application Data
DEL /A:H IconCache.db

4. The IconCache.db file has now been rebuilt.

Bypassing Captive Portals/Airport Pay Restrictions with Iodine on a Debian VPS Guide

This guide is intended for those who want to set up a Iodine on a Debian or Ubuntu VPS. Lots of time has been spent through trial and error trying to figure it out. Insight and portions of this guide have been taken

Server Setup:

1. Run one of the following scripts on your server below.
SSH into your server/VPS and run one of the below scripts:

1a. Ubuntu only installation!

cat >> /etc/apt/sources.list <<END
deb natty main restricted universe
apt-get update
apt-get -t natty install iodine
sed -i '$d' /etc/apt/sources.list

1b. Debian only installation!

cat >> /etc/apt/sources.list <<END
deb sid main
apt-get update
apt-get -t sid install iodine
sed -i '$d' /etc/apt/sources.list

Continue reading

Debian Nginx 0.7/PHP 5.3/MySQL 5.1 Install Guide

This script is based of 21Andy’s work, and Lowendbox’s work.

Please note that this script has been deprecated in favor of Xeoncross’s updated Lowendscript. This post remains here just for historical purposes.


The main differences compared to Andy’s and Lowendbox’s work are:
PHP 5.3 vs 5.2
Nginx 0.7 vs 0.6
MySQL 5.1 vs 5.0
Cleaner repos (for those Debian templates with broken repositories)

To run this script, enter in:


Afterward, run this to setup WordPress:

bash wordpress

Make sure you change to match your domain.

Continue reading

PPTP VPN Setup Guide for a Debian OpenVZ VPS

This guide is intended for those who want to set up a PPTP VPN on OpenVZ with Debian or Ubuntu on a capable provider such as Lots of time has been spent through trial and error trying to figure it out. Insight and portions of this guide have been taken from

An new automated script is now available! Check it out!

To verify PPP is working, run:

cat /dev/ppp

It should return this:

cat: /dev/ppp: No such device or address

Server Setup:

1. Install the pptp server package:

apt-get install pptpd

Continue reading

IPV6 Tunnel Setup Guide

This is my first attempt at editing and fixing someone else tutorial.

You will need a tunnel broker, and you can follow my guide and use Hurricane Electric. Once you have your account set up, you will need to create a regular tunnel, and all you have to do is enter in your public IP address which can be found at

With that set up, now you will need to get your tunnel info. Here is an example:

Server IPv4 Address:

Server IPv6 Address: 2001:480:a:40b::1/64

Client IPv4 Address: 123.456.789.101 (Your IP address here)

Client IPv6 Address: 2001:480:a:40b::2/64

Routed /64:2001:480:b:40b::/64

Continue reading